in RRE’s format · edit it on the page, then print or save as PDF
Not ready to send — 10 things outstanding
Priced As per Plan & Spec Dated has not been answered.
Bid Submission # has not been answered.
Private / Prevailing Wage has not been answered.
Visited Site / Job Walk has not been answered.
Project Performance Bond has not been answered.
Day / Night Works has not been answered.
Overtime has not been answered.
Estimator Assigned / Bid Out has not been answered.
5 of the scope matrix’s rows are unanswered. Each letter is a commitment to the customer, so an unanswered row cannot print as N/A.
22 scope matrix rows are a best guess and highlighted: check each and click to confirm or change it.
OutcomeNot recorded. Once you hear back, record it here: it is what the win rate on Home is made of.
8 fields in pink need your answer: nothing on the job says, so we did not guess. Press Edit proposal to fill them in.
DATE: 10/5/2026
ELECTRICAL BID PROPOSAL # [submission number — not answered]
Chipotle #5801 — Rocklin
920 University Avenue, Rocklin, CA
PROJECT / BID DETAILS [DIVISION 26 00 00]
Priced As per Plan & Spec Dated
[Priced As per Plan & Spec Dated — not answered]
Addendum Acknowledged
None received
Bid RFI
1
Bid Submission #
[Bid Submission # — not answered]
Private / Prevailing Wage
[Private / Prevailing Wage — not answered]
Visited Site / Job Walk
[Visited Site / Job Walk — not answered]
Project Schedule (start date)
TBD
Project Schedule (completion Date)
TBD
Project Performance Bond
[Project Performance Bond — not answered]
Day / Night Works
[Day / Night Works — not answered]
Overtime
[Overtime — not answered]
Type of Construction
TI Commercial
Project SQ.FT
2,383 SF
Estimator Assigned / Bid Out
[estimator name, phone and email — not answered]
Bid Valid through
60 days (Expires 12/4/2026)
GENERAL CONTRACTOR
[general contractor — not answered]
PROJECT & PAYMENT TERMS
Monthly Progress Payment
Change Orders to be billed as soon as the works are completed on-site, as a separate invoice
T&M tags are to be billed as change orders.
10% Retention.
RRE will require a copy of the Prime Contract between the General Contractor & the Owner
RRE will require a Copy of the Pre-Lien Information
RRE will require a Project Schedule before mobilizations
GC agrees to participate in bi-weekly calls with RRE in regards to project progress/issue (20-minute call virtual) arranged by RRE
NO Change order works to be performed without proper paperwork documentation.
Page 1
PROPOSAL / PRICING
From
RRE INC. ELECTRICAL CONTRACTORS 3449 Freedom Park Drive, North Highlands CA 95660
Date
10/5/2026
To
Chipotle #5801 — Rocklin 920 University Avenue, Rocklin, CA
We propose to furnish all material and labor, requisite and proper, and provide all Labor, materials, necessary machinery tools and means for performing the work for Chipotle #5801 — Rocklin located at 920 University Avenue, Rocklin, CA excluding any listed alternates below. All the work for Base Bid [DOES NOT INCLUDE ALTERNATIVE] shall be completed in a substantial and workman-like manner for the sum as shown below: Note: Price is inclusive of Tax.
COST#
DESCRIPTION
COST
BASE BID
Includes Interior Building and Site Electrical Works per plan & spec.
$58,051.12
FINAL COST
BASE BID
$58,051.12
BID QUALIFICATION / LEVELING
GC to provide a storage unit for temporary storage materials/large tools for the job site.
GC is responsible for the theft of material/large tools associated with the work of the EC
GC is responsible for locking the temporary storage unit.
GC to provide waste removal dumpster(s) and debris removal.
GC to remove all excess trenching spoils at GC’s cost.
Excludes any off-site street light or modification works
Includes use of MC Cables in T-bar areas / Hard lid Areas / Gyp Board and use of EMT for homeruns/power.
Page 2
Scope of Works
Inclusions
Inside Building
Furnish and install light fixtures per plan.
Furnish and install lighting controls (sensors, switches, dimmers).
Furnish and install lighting control panel.
Furnish and install receptacles per plan.
Furnish and install junction boxes per plan.
Furnish and install disconnect switches.
Furnish and install power to building signage.
Furnish and install conduit supports and hangers.
Furnish and install panelboards.
Exclusions
Excludes cutting of ceiling tiles for light fixtures. (By Others)
Excludes any 3rd party Testing such as SWBD Test & inspection, Panel test & Inspection, Ground System test, Short Circuit Coordination & Arc Flash Study w/labels, etc. (By Others)
Excludes any Low Voltage infrastructure, devices and terminations. (By Others)
Excludes any Fire Alarm Works. Excludes any wiring, conduit, devices, programming, testing etc. (By Others)
Excludes any electrical demo works. (By Others)
Change Order / Time and material rate as needed:
Trade
Per Hr rate
Electrician
TBD
Project Manager
TBD
Estimator
TBD
Superintendent
TBD
Truck Roll
TBD
Equipment
Per Day Rate
Equipment Operator
TBD
Labor
TBD
305 Mini Excavator
TBD
TL8 Skid Steer
TBD
Auger Machine
TBD
12K Excavator
TBD
Compactor
TBD
Page 3
TERMS & CONDITIONS
1.RRE is not to be held responsible for any manufacturer’s delayed shipping items.
2.RRE will not perform any change order works without a signed change order from the General Contractor.
3.Signed change order from the Authorized Project Manager / President
4.Time and material work to be performed upon agreed rates and billed as change orders.
Submittal Process
5.By approving the project submittals (light fixtures / light controls/ Panels / Switchgear etc), the General Contractor is agreeing that the approved types of equipment meet the design intent as per the plan & spec.
Change Order Process
6.This change order does not change the terms and conditions of the underlying contract except as otherwise outlined in the change order. Upon receipt of this proposal, please provide written acceptance of this Request.
7.Please advise RRE Inc Electrical Contractor should you have any questions or require clarification for the Change Order Request.
8.By approving this change order RRE Inc Electrical Contractors will not be held responsible if this change order does not meet the electrical design intent. Lead times may be subject to change at any point as dictated by the manufacturer. General Contractors / Owner / Tenant / Customer / Client agrees to hold RREInc Electrical Contractors harmless from all losses incurred due to product delays. Including but not limited to reasonable attorneys’ fees and other litigation costs and expenses General Contractors / Owner / Tenant / Customer / Client agrees to waive all claims against RREInc Electrical Contractors for any injuries, damages, losses, or claims, whether known or unknown which may arise during or resulting from participation in this agreement. Hereunto this proposed change order will take 72 Hours to commence. Please sign and return to our office as soon as possible. By signing this document, we agree with the terms & conditions as stated above.
Hidden Conditions
9.There will be hidden conditions that the Architect, Engineering Professionals, General Contractor, and Sub Contractors do not know until they are uncovered. Solution and pricing to hidden conditions uncovered will be determined at that point and time.
10.Underground Clause
All underground works shall be performed under the following circumstances:
Good weather conditions are defined as no precipitation or extreme weather events that could hinder the progress of the work.
Absence of rainfall during the scheduled work period.
The site must be leveled and staked out per the approved plans and specifications.
The absence of mud or other adverse site conditions may impede the underground work.
The pricing for this contract is based on the assumption of good/dry weather conditions. If RREInc Electrical Contractors are requested to perform the underground work under bad or unworkable weather conditions, there will be a cost impact. RREInc provides a detailed breakdown of the additional costs incurred due to such conditions, including but not limited to labor, equipment, and material expenses, which shall be subject to approval by the client or project manager before implementation.
Standard Exclusion for Underground Works: Unforeseen Site Conditions: Exclusions related to unforeseen site conditions, such as encountering rock formations, unanticipated groundwater, or contaminated soil, may require additional work and cost. Utilities and Services: Exclusions for the relocation, protection, or adjustment of existing utilities and services (e.g., water lines, gas lines, electrical conduits) unless explicitly stated otherwise in the scope of work. Permitting and Approvals: Exclusions for obtaining necessary permits, licenses, or approvals required for the underground works, including any associated fees or expenses. Design and Engineering: Exclusion for the design and engineering of underground structures or systems, unless explicitly included in the scope of work. Specialized Testing and Inspections: Exclusions for specialized testing and inspections beyond standard requirements, such as soil testing, geotechnical surveys, or third-party quality assurance/quality control services. Environmental Compliance: Exclusions related to compliance with environmental regulations and remediation of any environmental contamination encountered during underground works. Access and Site Preparation: Exclusions for access roads, temporary site facilities, and site preparation work not directly related to underground construction activities. Traffic Control and Safety Measures: Exclusions for traffic control measures, safety barriers, signage, and other measures required to ensure public safety during construction, unless explicitly included in the scope of work. Cleanup and Restoration: Exclusions for site cleanup, restoration of disturbed areas, and landscaping works following completion of the underground construction, unless explicitly included in the scope of work. Force Majeure Events: Exclusions for delays or damages caused by force majeure events such as natural disasters, acts of terrorism, or civil unrest, which are beyond the control of the contractor.
Excludes any cement slurry cap over conduits. (Unless stated in the scope of works)
Excludes any compaction testing works or reports.
Excludes Joint Trench
Excludes undermining any existing Boxes or T-Pads
Excludes any Vertical Shoring Works
Excludes any cart away of excess soil/dirt (Unless stated in the scope of works), this General Contractors responsibility
Excludes any Trench plates
Page 4
SUPPLY CHAIN, SUBMITTALS, AND LEAD TIME DISCLAIMER
Manufacturer and Supplier Delays
RRE Inc. Electrical Contractors shall not be held liable for any delays in the delivery of electrical gear, equipment, or materials caused by manufacturers, suppliers, shipping carriers, or other third parties beyond our control. This includes, but is not limited to, production backlogs, material shortages, shipping or freight disruptions, or other supply chain issues. In such cases, all project schedules, milestones, and completion deadlines shall be extended on a day-for-day basis equal to the length of the delay. No liquidated damages, penalties, or back charges shall be applied to RRE Inc. Electrical Contractors as a result of such delays. Furthermore, RRE Inc. reserves the right to submit for approval equivalent or substitute materials or to resequence work in a commercially reasonable manner to minimize the impact of such delays.
Submittal Approval and Design Intent
By approving this submittal, the Owner, Engineer, and/or General Contractor acknowledge that RRE Inc. Electrical Contractors is not responsible for verifying whether the submitted equipment or materials fully align with the electrical design intent. If the approved submittals do not conform to the original design concept or performance criteria, RRE Inc. shall be held harmless from any resulting issues, defects, or performance deficiencies in the electrical system.
Estimated Lead Time (Estimated Ship Date – ESD Disclaimer)
All lead times provided are Estimated Ship Dates (ESDs) and are based on information available at the time of issuance. These dates are subject to change without notice due to factors beyond the control of RRE Inc. Electrical Contractors, including but not limited to supplier or manufacturer production schedules, raw material availability, and shipping logistics. RRE Inc. makes no guarantees regarding actual ship or delivery dates and shall not be held liable for any impacts resulting from changes to the ESD.
Page 5
SCOPE OF WORKS
F = FURNISH/SUPPLY I = INSTALL N/A = NOT APPLICABLE BO = BY OTHERS E = EXISTING
27 rows in pink need your review: where the job says, we filled them in from it; where it does not, we either used RRE’s past proposals or left the row blank, and we are not sure. Hover a row to see why, then press Edit proposal to confirm or change it.
BUILDING / INTERIOR — LIGHTING WORKS
F
I
N/A
BO
E
SCOPE
F
I
LIGHT FIXTURES
F
I
LAMPS
F
I
EXIT LTG’S
F
I
EMERGENCY LTG’S
F
I
LIGHT SUPPORTS
I
LIGHT CONTROLS
F
I
LTG COMMISSIONING
F
I
T-24 CERTIFICATION
N/A
BATTERY BACKUP / EM DRIVERS
N/A
LTG INVERTERS
N/A
TIME CLOCK
N/A
LTG CONTACTORS
N/A
PHOTOCELL
N/A
OVERRIDE SWITCH
F
I
LTG CONTROL PANEL (LCP)
N/A
POWER PACK / DIMMING RELAY
N/A
EMS SYSTEM
N/A
HOOD LIGHT / POWER
N/A
SUBMISSION OF LTG CONTROL PLAN / DESIGN
N/A
FREEZER / COOLER LTGS
F
I
WORK FROM EXISTING CIRCUITRY
N/A
PER PLAN & SPEC LIGHT PACKAGE
N/A
VE LIGHT PACKAGE
EXTERIOR — LIGHT WORKS
F
I
N/A
BO
E
SCOPE
N/A
PARKING POLE LTG’S
N/A
EXTERIOR BLDG LTG
N/A
LTG POLE BASE
TRENCH & BACKFILL PARKING POLE LTG MAX 2FT DEPTH
N/A
BACKFILL MATERIAL - NATIVE SOIL
N/A
BO
COMPACT TRENCH
N/A
BO
COMPACTION TEST
N/A
PARKING POLE LTG BRANCH CIRCUIT
N/A
SCH 40 PVC CONDUIT FOR BRANCH CIRCUIT
N/A
GROUND ROD PARKING POLE LTG & N-9 CHRISTY BOX
N/A
RE-LOCATED EXISTING PARKING POLE LTG
N/A
TIE RELOCATED PARKING POLE LTG TO THE EXISTING CIRCUITS
SPECIALTY ELECTRICAL WORKS
F
I
N/A
BO
E
SCOPE
N/A
INSTALL DRIVE THRU LOOP DETECTORS
N/A
CONCRETE SAW CUTTING FOR DRIVE THRU LOOP
BO
SHOOTING OF CEILING WIRES FOR LIGHT FIXTURES
BO
OPENING UP DRYWALL OR CUTTING OF CEILING TILES FOR LIGHTS & PLUGS
Page 6
F = FURNISH/SUPPLY I = INSTALL N/A = NOT APPLICABLE BO = BY OTHERS E = EXISTING
POWER WORKS
F
I
N/A
BO
E
SCOPE
F
I
RECEPTACLES PER PLAN
F
I
J-BOXES PER PLAN
F
I
DISCONNECT SWITCHES / FUSES
N/A
FLOOR BOXES / POWER POLES
N/A
POWER TO KITCHEN EQUIPMENT
CONCRETE SAW CUTTING / X-RAY, CORE DRILL & PATCH BACK
F
I
POWER TO BUILDING SIGNAGE
N/A
FIRE STOPPING / CAULKING
N/A
POWER TO ANSUL / HOOD SYSTEM
F
I
POWER TO WALK-IN REFRIGERATOR / FRIDGE
N/A
SEAL CONDUITS IN FREEZER AREA
F
I
CONDUIT RACKS / HANGERS / UNISTRUT SUPPORTS
F
I
TELEPHONE TERMINAL BACKBOARD
N/A
POWER TO DIGITAL MENU BOARD
N/A
POWER TO SITE SIGNAGE SIGN
N/A
POWER / RACEWAY TO FUTURE EV CHARGER
N/A
POWER / RACEWAY TO MONUMENT SIGN
N/A
POWER TO EXHAUST FANS
N/A
POWER TO FIRE ALARM PANEL
N/A
120V POWER FOR MODULAR FURNITURE / POS
N/A
VEHICLE LOOP DETECTORS CONDUITS / INSTALL
N/A
POWER FOR HAND DRYER
N/A
TEMP POWER TO MAN HOIST
N/A
TEMP POWER TO ELEVATOR
MECHANICAL / PLUMBING POWER WORKS
F
I
N/A
BO
E
SCOPE
N/A
120V POWER TO ELECTRIC WATER HEATER
N/A
DISCONNECT SWITCH FOR WATER HEATER & EQUIPMENT CONNECTION
N/A
120V POWER TO RECIRCULATION PUMP
N/A
POWER FOR TAMPER / FLOW SWITCH
N/A
POWER FOR FIRE PUMP / CONTROLLER ETC
N/A
POWER FOR SUMP PUMP
N/A
POWER FOR TRASH COMPACTOR
N/A
POWER FOR PATIO HEATER
N/A
POWER / RACEWAY FOR ROOF SENSOR
N/A
120V POWER TO DUCT SMOKE DETECTORS
Page 7
F = FURNISH/SUPPLY I = INSTALL N/A = NOT APPLICABLE BO = BY OTHERS E = EXISTING
SINGLE LINE WORKS
F
I
N/A
BO
E
SCOPE
BO
UTILITY DRAWINGS
BO
TRANSFORMER PAD
BO
UTILITY TRANSFORMER
BO
TRANSFORMER TIE-IN
BO
PRIMARY FEEDERS CONDUITS
BO
PRIMARY FEEDER WIRES / CONDUCTORS
BO
SECONDARY FEEDER CONDUITS
BO
SECONDARY FEEDER CONDUCTORS
BO
PICK UP 5FT FROM THE JT TO BUILDING FOR SECONDARY FEEDER CONDUIT
E
MAIN SWITCHBOARD / SERVICE
F
I
E
PANELBOARDS
BUILDING INTERIOR TRANSFORMER
TRANSFORMER BRACKETS - FOR HANGING ETC
F
I
E
PANEL BREAKERS
F
I
E
PULL CANS / GUTTERS
F
I
E
PANEL FEEDER CONDUIT PER PLAN
F
I
E
PANEL FEEDER WIRES / CONDUCTORS PER PLAN
F
I
ELECTRICAL DISCONNECT PER PLAN
E
MAIN BREAKER
N/A
E
GROUNDING WORKS PER PLAN
N/A
CONCRETE PAD FOR GEAR / EQUIP
F
I
EXTEND EXISTING FEEDERS
N/A
DEMO EXISTING PANELS
N/A
CONCRETE CORE PENETRATION FOR THE FEEDERS
N/A
FUTURE SOLAR STUB UPS
F
I
NEW BREAKER IN EXISTING PANEL
N/A
RE-LOCATION OF PANEL PER PLAN
LOW VOLTAGE WORKS
F
I
N/A
BO
E
SCOPE
F
I
TELE / DATA DROPS PER PLAN
F
I
CONDUITS WITH PULL STRING ONLY FOR TELE / DATA DROPS
N/A
ALL LOW-VOLTAGE WIRING
BO
ALL LOW VOLTAGE TERMINATIONS
N/A
ALL LOW-VOLTAGE PROGRAMMING
BO
ALL LOW-VOLTAGE DEVICES
N/A
RACEWAYS / BACK BOXES FOR CAMERAS
F
I
RACEWAYS / BACK BOXES FOR SPEAKERS
N/A
RACEWAYS / BACK BOXES FOR ACCESS CONTROLS
N/A
RACEWAYS FOR ERCS SYSTEMS
N/A
RACEWAYS / BACK BOXES FOR FIRE ALARM SYSTEM
N/A
RACEWAYS / BACK BOXES FOR TWO-WAY COMMUNICATIONS
N/A
FIRE WATCH
N/A
PUSH BUTTON / DOOR BUZZER / TRANSFORMER
N/A
MAIN TELECOM LINE EXTENSION
N/A
HVAC CONTROL WIRING
ROOFTOP WORKS
F
I
N/A
BO
E
SCOPE
F
I
SERVICE RECEPTACLES / POWER
N/A
POWER TO RTU’S / HEATPUMPS
F
I
POWER TO ROOF TOP EQUIPMENT
F
I
CONDUITS / RACKS
N/A
BO
ROOF PENETRATION (CUTTING) & SEALING (PATCH)
F
I
DISCONNECT SWITCHES PER PLAN
N/A
POWER FOR RTU HAVING INTEGRAL DISCONNECT
N/A
FUTURE SOLAR CONDUIT
Page 8
F = FURNISH/SUPPLY I = INSTALL N/A = NOT APPLICABLE BO = BY OTHERS E = EXISTING
UNDERGROUND EXCAVATION WORKS
F
I
N/A
BO
E
SCOPE
N/A
SITE PARKING POLE LIGHTS
N/A
OFF SITE LIGHT
N/A
JOINT TRENCH
N/A
EV CHARGER
N/A
DRIVE THRU MENU BOARDS / SIGNAGE ETC
N/A
TRANSFORMER PAD
N/A
PRIMARY FEEDERS
N/A
SECONDARY FEEDERS
N/A
TELEPHONE / DATA LINE
OFF-HAULING EXCESS SOIL
COMPACT ELECTRICAL TRENCHES
N/A
COMPACTION TEST
N/A
USE OF 1FT SAND ON BACKFILL
N/A
USE OF 3 FT AB MATERIAL ON BACKFILL
N/A
USE OF NATIVE SOIL IN BACKFILL MATERIAL
N/A
CONCRETE SAW CUTTING / PATCHBACK
N/A
BO
DRIVE-THRU LOOP CONCRETE SAW CUTTING
N/A
ASPHALT / BLACKTOP REMOVAL
N/A
ASPHALT / BACK TOP PATCHBACK
N/A
TRAFFIC-RATED PULL BOX
N/A
BO
TRAFFIC CONTROLS
SAFE OFF / DEMO / TEMP LIGHT / POWER
F
I
N/A
BO
E
SCOPE
F
I
SAFE OFF AT THE PANEL
N/A
DEMO WORKS
N/A
DISPOSAL OF OLD LAMPS & FIXTURES / GEAR
N/A
TEMP CONSTRUCTION STRING LTG
N/A
SO CORD & SPIDER BOXES
DIRECT JOB EXPENSE
F
I
N/A
BO
E
SCOPE
F
I
MOBILIZATION
F
I
PROJECT MANAGEMENT FEES
F
I
OFFICE ADMIN / INSURANCE
F
I
RED / LINE / AS BUILT DWG
F
I
SAFETY / PPE COST
F
I
WARRANTY - 1 YEAR ON INSTALL
F
I
WARRANTY - 1 YEAR ON RRE FURNISHED EQUIPMENT / LTGS
F
I
FOREMAN / VEHICLE ALLOWANCE
F
I
PROJECT CLOSE OUT DOCUMENTS
RESPONSIBILITY MATRIX
EQUIPMENT
PROVIDER
LIGHT FIXTURES
BY RRE
LIGHT CONTROLS
?
SWITCHGEAR MSB
N/A
SWITCHGEAR / PANELS PER PLAN
BY RRE
LOW VOLTAGE DEVICES
BY OTHERS
LOW VOLTAGE WIRING
BY OTHERS
LOW VOLTAGE TERMINATION & PROGRAMMING
BY OTHERS
EMS SYSTEM
N/A
POWER POLE
N/A
ALL FA DEVICES
N/A
CONCRETE CORE DRILL
BY OTHERS
DRIVE THRU LOOPS
N/A
Page 9
STANDARD EXCLUSION
Below is the Exclusion that applies if not stated in the scope of work above
ANY PLAN CHECK OR PERMIT FEES
INSPECTION FEES
ENGINEERS OR UTILITY COMPANY FEES
ANY ADDENDUMS NOT PROVIDED
TEMP POWER & TEMP LIGHT
ANY PAINTING OR PATCHING WORKS
ANY WORKS ASSOCIATED WITH GAS OR GAS LINES
JOINT TRENCH WORKS
CONCRETE OR ASPHALT CUTTING & PATCHING BACK
RELOCATION OF FURNITURE
ANY DESIGN & BUILD SCOPE OF WORKS
ANY DEMO WORK UNLESS STATED IN THE SCOPE
ANY 3RD PARTY TESTING WORKS
CURING OF CEILING TILES
TEMPORARY FENCING
FREEZER / COOLER LIGHTS
ANY DEFINED SUBMITTAL SCOPE OF WORKS
ANY SHEETROCK WORKS OR CUTTING OF CEILING TILES FOR LIGHT FIXTURES
ANY FIRE ALARM WORKS NOT STATED IN THE SCOPE OF WORKS
ROOF JACKS
ROOF WATERPROOFING
ROOF PENETRATIONS
CORE DRILL OR ANY CONCRETE X-RAY WORKS
ANY OFF-SITE / STREET LIGHTS
FIRE STOPPING / FIRE CAULKING
COMPACTION TEST
ANY MECHANICAL CONDUITS OR MECHANICAL CONTROL WIRING
STREET SWEEPING
FCAP PANEL
PV OR SOLAR WORKS
ANY ACCESS CONTROL SYSTEM
BOND FEES
LOAD CALCULATIONS
ANY SURVEYING OR STAKING
DUMPSTER OR TRASH BINS
CONCRETE WASHOUT AREA
SIGNAGE SUPPLIED & INSTALLED BY OTHERS
RTU UNITS SUPPLIED & INSTALLED BY OTHERS
CONCRETE PADS FOR ELECTRICAL EQUIPMENT – BY OTHERS
ANY BATTERY BACKUP SYSTEM – BY OTHERS
ANY GENERATOR WORKS NOT STATED IN THE SCOPE
ANY TEMP GENERATOR
FLY FAN / EWH TO BE SUPPLIED & INSTALLED BY OTHERS
WALK-IN FREEZER/CON/EVAP SUPPLIED
ANY LEED CERTIFICATION REQUIREMENTS
ANY LOW VOLTAGE WORKS OR DEVICES
ANY UNFORESEEN CONDITIONS
MAIN BREAKER TESTING
ANY GATE CONTROL OR MOTORS
PREVAILING WAGE
SUPPLY OF EV CHARGERS
ERCC SYSTEM
TWO-WAY COMMUNICATION SYSTEM
Page 10
ACCEPTANCE & PAYMENT TERMS
Payments shall be made each thirty days as the work progresses. The entire amount of the contract shall be paid within thirty days after completion.
Service and Finance Charges are applicable on past accounts at the rate of 1 ½ percent per month on amounts thirty (30) days past due, which is equal to an annual percentage rate of 18 percent. Such charges are shown as “service charges”. There is no service charge if accounts are paid within thirty days of the end of the month in which purchases are made.
Any alteration or deviation from the above specifications involving the extra cost of material and/or labor will only be executed upon written orders for the same and will become an extra charge over the sum mentioned in this contract. All agreements must be made in writing.
The contractor agrees to carry Workman’s Compensation and Public Liability Insurance and also to pay all Sales Taxes, Old Age Benefits, and Unemployment Compensation Taxes upon the material and labor furnished under this contract, as required by the United States Government and the State in which this work is performed.
Respectfully submitted,
RRE INC. ELECTRICAL CONTRACTORS
PROJECT MANAGER
Note: This proposal may be withdrawn by us if not accepted within 60 days of the proposal date.
Acceptance
You are hereby authorized to furnish all materials and labor required to complete the work mentioned in the above proposal, for which the undersigned agrees to pay the amount mentioned in the said proposal, and according to the terms thereof. I also agree to pay all reasonable costs, charges, and attorney’s fees that may accrue hereon after any default in payments.
Proposal Accepted:
(Signature)
Printed Name of Signer:
Title:
Date:
Page 11
Basis of this price (internal — does not print)
Base bid$58,051.12from 154 accepted lines
Chipotle #5801 — Rocklin
920 University Avenue, Rocklin, CA · Bid 2026-10-05
Drawings this price is based on
No symbol legend was found on the drawings; symbols were named against NECA 100-2006.
Not included in this price
Hangers and supports (about 38 hours on a comparable job).
Fire alarm (about 14.2 hours on a comparable job).
Site work (about 45 hours on a comparable job).
Lighting J-box rule.
The items above come to roughly 97.2 hours on a comparable job and are not in this price. They are stated rather than omitted, because a scope boundary nobody wrote down is the one that becomes an argument. The figure sizes the hole; it is not a measurement of this set and must never be read as one.
Scope included (154 lines)
1 ea — 1" 90 DEG FLEX CONNECTOR, 1" 90° Screw Squeeze Connector [Chipotle #5801 · ADD ON SCOPE · row 83]· rough in wall
121.9 ea — 1" EMT CONNECTOR, EMT Set Screw Connector, Steel, 1 inch [Chipotle #5801 · ADD ON SCOPE · row 114]· rough in wall
121.9 ea — 1" EMT COUPLING, EMT Set Screw Coupling, Steel, 1 inch [Chipotle #5801 · ADD ON SCOPE · row 114]· rough in wall
736.5 ft — 10 THHN, 10 AWG THHN/THWN-2 Stranded Copper [Chipotle #5801 · SITE WORKS · row 2]· pulling
516 ft — 10 THHN, 10 AWG THHN/THWN-2 Stranded Copper [Chipotle #5801 · SITE WORKS · row 23]· pulling
480 ft — 10 THHN, 10 AWG THHN/THWN-2 Stranded Copper [Chipotle #5801 · ADD ON SCOPE · row 83]· pulling
1 ft — 10 THHN, 10 AWG THHN/THWN-2 Stranded Copper [Chipotle #5801 · ADD ON SCOPE · row 83]· pulling
1,077 ea — 10 X 1-1/2 COMB PAN HEAD TAP SCREW, Sheet Metal Screw, # 10 x 1-1/2", Pan Head, Square Drive, Steel, 100/PK [Chipotle #5801 · ROUGH-INS · row 101]· rough in wall
121.9 ea — 10 X 1-1/2 COMB PAN HEAD TAP SCREW, Sheet Metal Screw, # 10 x 1-1/2", Pan Head, Square Drive, Steel, 100/PK [Chipotle #5801 · ADD ON SCOPE · row 114]· rough in wall
2 ea — 10"X10"X4" J-BOX, NEMA 1 Screw Cover Enclosure, Powder Coated Steel without Knockouts, 10" x 10" x 4" [Chipotle #5801 · ROUGH-INS · row 298]· rough in wall
1 ea — LC&D CHELSEA SWITCH, 4" Square Box, Welded, 2-1/8" Depth, 1/2, 3/4 and 1" Knockouts, Steel [Chipotle #5801 · LIGHT FIXTURES & CONTROLS · row 133]· rough in wall
1 ea — LIGHTING CONTROL PANEL, 4" Square Box, Welded, 2-1/8" Depth, 1/2, 3/4 and 1" Knockouts, Steel [Chipotle #5801 · LIGHT FIXTURES & CONTROLS · row 145]· rough in wall
1 ea — LIGHTING CONTROLS, 3 GANG DIMMER SWITCH [Chipotle #5801 · LIGHT FIXTURES & CONTROLS · row 125]· trim
2 ea — None, #6 AWG Lug One Hole [Chipotle #5801 · SITE WORKS · row 23]· rough in slab
2 ea — None, Round Pull Box 9" x 12" [Chipotle #5801 · SITE WORKS · row 23]· rough in slab
2 ea — None, F08RLIGHT Cover Marked "Lighting" [Chipotle #5801 · SITE WORKS · row 23]· rough in slab
2 ea — None, 5/8" x 10 Ground Rod [Chipotle #5801 · SITE WORKS · row 23]· rough in slab
2 ea — None, 1/2" x 1" x 2 Ground Clamp [Chipotle #5801 · SITE WORKS · row 23]· rough in slab
2 ft — None, #6 AWG Bare CU Solid [Chipotle #5801 · SITE WORKS · row 23]· rough in slab
2 ea — None, 5/8" x 10 Ground Rod [Chipotle #5801 · SITE WORKS · row 2]· rough in slab
2 ea — None, 1/2" x 1" x 2 Ground Clamp [Chipotle #5801 · SITE WORKS · row 2]· rough in slab
2 ft — None, #6 AWG Bare CU Solid [Chipotle #5801 · SITE WORKS · row 2]· rough in slab
2 ea — None, #6 AWG Lug One Hole [Chipotle #5801 · SITE WORKS · row 2]· rough in slab
2 ea — None, Round Pull Box 9" x 12" [Chipotle #5801 · SITE WORKS · row 2]· rough in slab
2 ea — None, F08RLIGHT Cover Marked "Lighting" [Chipotle #5801 · SITE WORKS · row 2]· rough in slab
1 ea — None, Wire nuts / butt splices (direct burial rated if required) [Chipotle #5801 · SITE WORKS · row 44]· rough in slab
1 ea — None, Terminal lugs / ferrules [Chipotle #5801 · SITE WORKS · row 44]· rough in slab
1 ea — None, Labeling materials [Chipotle #5801 · SITE WORKS · row 44]· rough in slab
1 ea — None, Electrical tape / sealant / misc consumables [Chipotle #5801 · SITE WORKS · row 44]· rough in slab
1 ea — None, Vehicle Detector Loop [Chipotle #5801 · SITE WORKS · row 44]· rough in slab
288 ft — P1000 UNISTRUT, Deep Strut - No Holes, Steel, Pre-Galvanized, 1-5/8" x 1-5/8" x 10' [Chipotle #5801 · HANGERS & SUPPORTS · row 2]· rough in wall
1 ea — PANEL A, PANEL A INSTALLATION [Chipotle #5801 · DISCONNECTS + PANELS + TERMINAT · row 20]· rough in wall
1 ea — PANEL B, PANEL B INSTALLATION [Chipotle #5801 · DISCONNECTS + PANELS + TERMINAT · row 28]· rough in wall
1 ea — PANEL BDP, PANEL B INSTALLATION [Chipotle #5801 · DISCONNECTS + PANELS + TERMINAT · row 24]· rough in wall
4 ea — PULL STATION, 4" Square Box, Welded, 2-1/8" Depth, 1/2, 3/4 and 1" Knockouts, Steel [Chipotle #5801 · ADD ON SCOPE · row 12]· rough in wall
2 ea — SHOCK BLOCK INSTALL, Installation - Shock Block [Chipotle #5801 · ROUGH-INS · row 315]· trim
1 ea — WP J-BOX, Weatherproof Box, 1 Gang, (3) 3/4" Outlets, 2-5/8" Deep, Aluminum Die Cast [Chipotle #5801 · ADD ON SCOPE · row 58]· rough in wall
1 ea — WP J-BOX, Weatherproof Box, 1 Gang, (3) 3/4" Outlets, 2-5/8" Deep, Aluminum Die Cast [Chipotle #5801 · ROUGH-INS · row 319]· rough in wall
1 ea — WP J-BOX (3/4"), Weatherproof Box, 1 Gang, (3) 3/4" Outlets, 2-5/8" Deep, Aluminum Die Cast [Chipotle #5801 · ADD ON SCOPE · row 83]· rough in wall
1 ea — WP J-BOX COVER, Weatherproof Cover, 1-Gang, Blank, Aluminum, Gray [Chipotle #5801 · ADD ON SCOPE · row 83]· rough in wall
1 ea — WP J-BOX W/ 10/3 LQT, Weatherproof Box, 1 Gang, (3) 3/4" Outlets, 2-5/8" Deep, Aluminum Die Cast [Chipotle #5801 · ADD ON SCOPE · row 64]· rough in wall
1 ea — WP J-BOX W/ 10/3 LQT, Weatherproof Box, 1 Gang, (3) 3/4" Outlets, 2-5/8" Deep, Aluminum Die Cast [Chipotle #5801 · ROUGH-INS · row 325]· rough in wall
1 ea — WP J-BOX W/ 3#6+1#10 1"LQT, Weatherproof Box, 1 Gang, (3) 3/4" Outlets, 2-5/8" Deep, Aluminum Die Cast [Chipotle #5801 · ROUGH-INS · row 344]· rough in wall
2 ea — WP J-BOX W/ MOTOR SWITCH, Weatherproof Box, 1 Gang, (3) 3/4" Outlets, 2-5/8" Deep, Aluminum Die Cast [Chipotle #5801 · ADD ON SCOPE · row 74]· rough in wall
2 ea — WP J-BOX W/ MOTOR SWITCH, Weatherproof Box, 1 Gang, (3) 3/4" Outlets, 2-5/8" Deep, Aluminum Die Cast [Chipotle #5801 · ROUGH-INS · row 335]· rough in wall
Every scope line cites the sheet the number was read from, taken straight from the model’s provenance rather than reconstructed by hand. Back to the estimate →
RRE