E5.0 — ELECTRICAL SINGLE-LINE DIAGRAM, LOAD CALCULATION & PANEL SCHEDULE

Single-line diagram, load calculation and panel H schedule. Gear, breakers, feeders and grounding read from the one-line and schedule text; feeder footage from the one-line LENGTH callouts. No plan devices on this sheet.

Names come from: no legend on this sheet, so NECA 100-2006 is what a name rests on. It is the baseline for what a symbol MEANS, never for matching shapes — proportions differ per firm. Confirming a name here is a correction, and corrections are what build the firm's file.

Scale is UNSET. Nothing on this sheet has been measured. The reader declined to infer a scale rather than guess one, so there is no raceway and no branch wire off this sheet — together the largest block of material on a job of this kind. Set it from the title block and measurement becomes available.

acting aslookadd a markstrike a markPut your name in to mark this sheet up. Looking needs no name.

zoom−100%+fit2×3×sheetonoffcountsonoff26 of 26 marks drawn

Page 61 of Copy of Drawings.pdf, recorded by the read.

Fetching page 61…

47 changes on this sheet, each saved as it was made · ✓ confirmed by kelchlin Sep 30, 6:07 PMReopen sheetSaveSave & next: E6.0 →

History on this sheet (48)

• Sep 30, 6:07 PM · kelchlin saved the sheet
• Sep 30, 6:07 PM · kelchlin settled a footage — “L-0098 = 240 ft”
• Sep 30, 6:07 PM · kelchlin settled a footage — “L-0102 = 70 ft”
• Sep 30, 6:05 PM · kelchlin settled a footage — “L-0101 = 490 ft”
• Sep 30, 6:05 PM · kelchlin settled a footage — “L-0102 = 70 ft”
• Sep 30, 6:04 PM · kelchlin settled a footage — “L-0038 = 35 ft”
• Sep 30, 6:04 PM · kelchlin settled a footage — “L-0035 = 115 ft”
• Sep 30, 6:04 PM · kelchlin settled a footage — “L-0034 = 230 ft”
• Sep 30, 6:04 PM · kelchlin settled a footage — “L-0032 = 130 ft”
• Sep 30, 6:04 PM · kelchlin settled a footage — “L-0031 = 260 ft”
• Sep 30, 6:04 PM · kelchlin settled a footage — “L-0007 = 60 ft”
• Sep 30, 6:04 PM · kelchlin settled a footage — “L-0004 = 60 ft”
• Sep 30, 5:56 PM · Claude (at kelchlin's request) settled a footage — “L-0007 = 60 ft”
• Sep 30, 5:42 PM · kelchlin settled a footage — “L-0038 = 35 ft”
• Sep 30, 5:42 PM · kelchlin settled a footage — “L-0098 = 240 ft”
• Sep 30, 5:42 PM · kelchlin settled a footage — “L-0102 = 70 ft”
• Sep 30, 5:41 PM · kelchlin settled a footage — “L-0032 = 130 ft”
• Sep 30, 5:40 PM · kelchlin settled a footage — “L-0031 = 260 ft”
• Sep 30, 5:40 PM · kelchlin settled a footage — “L-0004 = 60 ft”
• Sep 30, 5:40 PM · kelchlin settled a footage — “L-0032 = 130 ft”
• Sep 30, 5:40 PM · kelchlin settled a footage — “L-0031 = 260 ft”
• Sep 30, 4:49 PM · kelchlin settled a footage — “L-0098 = 240 ft”
• Sep 30, 4:49 PM · kelchlin settled a footage — “L-0038 = 35 ft”
• Sep 30, 4:49 PM · kelchlin settled a footage — “L-0037 = 70 ft”
• Sep 30, 4:49 PM · kelchlin settled a footage — “L-0035 = 115 ft”
• Sep 30, 4:49 PM · kelchlin settled a footage — “L-0034 = 230 ft”
• Sep 30, 4:49 PM · kelchlin settled a footage — “L-0032 = 130 ft”
• Sep 30, 4:49 PM · kelchlin settled a footage — “L-0031 = 260 ft”
• Sep 30, 4:47 PM · kelchlin settled a footage — “L-0006 = 240 ft”
• Sep 30, 4:47 PM · kelchlin settled a footage — “L-0004 = 60 ft”
• Sep 30, 4:32 PM · kelchlin settled a footage — “L-0030 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0031 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0032 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0033 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0034 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0036 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0037 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0038 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0098 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0099 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0101 = 0 ft”
• Sep 30, 4:31 PM · kelchlin settled a footage — “L-0102 = 0 ft”
• Sep 30, 4:30 PM · kelchlin settled a footage — “L-0103 = 0 ft”
• Sep 30, 4:29 PM · kelchlin settled a footage — “L-0007 = 0 ft”
• Sep 30, 4:29 PM · kelchlin settled a footage — “L-0006 = 0 ft”
• Sep 30, 4:29 PM · kelchlin settled a footage — “L-0004 = 0 ft”
• Sep 30, 4:28 PM · kelchlin added a suggested line — “L-0122: RRE PER-JOB LOOSE PARTS × 1”
• Sep 30, 4:28 PM · kelchlin added a suggested line — “L-0121: RRE PER-JOB KIT × 1”

▸ Answered on this sheet3

Footage0 need you · 10 read by the reader

Nothing here needs you: every run has a length the reader measured or read off the drawing.

Show the 10 the reader gave a length (to check or change)

By symbol14 of 14 shown

showing everything foundshowing named only

26

all marks

hover a group to filter the plan

Counted here, not marked on the drawing

The takeoff counted these from this sheet (circuit labels, the panel schedule) without placing a mark. Marks for drawn symbols come with the symbol-counting step.

0 × MAIN SWITCHBOARD 800A 208Y/120V 3PH 4W NEMA 3R 65KAIC, 800A 3P 100% RATED MAIN, METERING, 4 FUTURE SPACES0 × CIRCUIT BREAKER 200A 3P IN MSB (FEEDS PANEL H)0 × PANELBOARD 225A BUS 200A 3P MAIN BREAKER 120/208V 3PH 4W 42 CKT BOLT-ON SURFACE 22KAIC0 × 2" PVC SCH 40 CONDUIT UNDERGROUND (MSB TO PANEL H FEEDER)0 × #3/0 AWG CU THHN/THWN FEEDER CONDUCTOR0 × #6 AWG CU GROUND CONDUCTOR2 × TERMINATION #3/0 FEEDER 200A 3P1 × TERMINATION 800A 3P SERVICE MAIN0 × GROUNDING ELECTRODE CONDUCTOR #3/0 AWG CU WITH CONNECTIONS (COLD WATER PIPE, BUILDING STEEL, UFER)1 × MAIN BONDING JUMPER #250 KCMIL CU0 × GROUND RESISTANCE TEST 3-POINT FALL OF POTENTIAL (25 OHM MAX)0 × CIRCUIT BREAKER 20A 1P 120V BOLT-ON0 × CIRCUIT BREAKER 30A 3P 208V BOLT-ON0 × CIRCUIT BREAKER 50A 3P 208V BOLT-ON0 × CIRCUIT BREAKER 40A 2P 208V BOLT-ON8 × TERMINATION 20A 1P BRANCH CIRCUIT1 × TERMINATION 30A 3P EQUIPMENT CIRCUIT1 × TERMINATION 50A 3P EQUIPMENT CIRCUIT3 × TERMINATION 40A 2P EQUIPMENT CIRCUIT0 × 1" PVC SCH 40 CONDUIT UNDERGROUND - EV-1 FEEDER0 × #6 AWG CU THHN/THWN - EV-1 FEEDER0 × #10 AWG CU GROUND - EV-1 FEEDER0 × 1" PVC SCH 40 CONDUIT UNDERGROUND - EV-2 FEEDER0 × #6 AWG CU THHN/THWN - EV-2 FEEDER0 × #10 AWG CU GROUND - EV-2 FEEDER0 × 1" PVC SCH 40 CONDUIT UNDERGROUND - EV-3 FEEDER0 × #8 AWG CU THHN/THWN - EV-3 FEEDER0 × #10 AWG CU GROUND - EV-3 FEEDER0 × PANEL NAMEPLATE ENGRAVED LAMINATED (MSB, PANEL H)0 × ARC FLASH WARNING LABEL (MSB, PANEL H)0 × TYPED PANEL DIRECTORY8 × PANEL SAFE-OFF0 × 2" PVC SCH 40 CONDUIT (FEEDER MSB TO PANEL H)0 × #3/0 AWG CU THWN FEEDER CONDUCTOR0 × #6 AWG CU THWN EQUIPMENT GROUND (FEEDER MSB TO PANEL H)0 × 1" PVC SCH 40 CONDUIT (EVSE FEEDERS)0 × #6 AWG CU THWN (EVSE FEEDERS EV-1, EV-2)0 × #8 AWG CU THWN (EVSE FEEDER EV-3)0 × #10 AWG CU THWN EQUIPMENT GROUND (EVSE FEEDERS)60 × #3/0 AWG BARE CU GROUNDING ELECTRODE CONDUCTOR (GEC)

8

H · 20A 1P breakers

read from the single-line diagram / panel schedule

takeoff: CIRCUIT BREAKER 20A 1P BOLT-ON (PANEL H)

3

H · 40A 2P breakers EVSE

read from the single-line diagram / panel schedule

takeoff: CIRCUIT BREAKER 40A 2P BOLT-ON (PANEL H, EV-1/EV-2/EV-3 EVSE)

2

H · panelboard 225A 42 ckt

read from the single-line diagram / panel schedule

takeoff: PANELBOARD H 120/208V 3PH 4W 225A BUS, 200A 3P MAIN BREAKER, 42 CKT, BOLT-ON, SURFACE, 22 KAIC

2

SN7 · arc-flash labels

read from the single-line diagram / panel schedule

takeoff: ARC-FLASH HAZARD WARNING LABEL (CEC 110.16)

2

SN2 · nameplates

read from the single-line diagram / panel schedule

takeoff: LAMINATED NAMEPLATE, PANELBOARD / SWITCHBOARD

1

MSB · main switchboard 800A

read from the single-line diagram / panel schedule

takeoff: MAIN SWITCHBOARD MSB 800A 208Y/120V 3PH 4W NEMA 3R 65 KAIC, 800A 3P 100% RATED MAIN, (1) 200A 3P DISTRIBUTION BREAKER, (4) SPACES FOR FUTURE PANEL

1

MSB · 200A 3P feeder breaker

read from the single-line diagram / panel schedule

takeoff: CIRCUIT BREAKER 200A 3P IN MSB (SERVES PANEL H)

1

H · 30A 3P breaker AC-1

read from the single-line diagram / panel schedule

takeoff: CIRCUIT BREAKER 30A 3P BOLT-ON (PANEL H, AC-1)

1

H · 50A 3P breaker AC-2

read from the single-line diagram / panel schedule

takeoff: CIRCUIT BREAKER 50A 3P BOLT-ON (PANEL H, AC-2)

1

GND · cold water pipe connection

read from the single-line diagram / panel schedule

takeoff: GROUNDING ELECTRODE CONNECTION, MAIN COLD WATER PIPE (#3/0 CU, LISTED CLAMP)

1

GND · building steel connection

read from the single-line diagram / panel schedule

takeoff: GROUNDING ELECTRODE CONNECTION, BUILDING STRUCTURAL STEEL (#3/0 CU, EXOTHERMIC)

1

GND · UFER electrode

read from the single-line diagram / panel schedule

takeoff: CONCRETE-ENCASED ELECTRODE (UFER) CONNECTION, #3/0 CU

1

SN10 · ground resistance test

read from the single-line diagram / panel schedule

takeoff: GROUND RESISTANCE TEST, THREE-POINT METHOD (25 OHMS MAX)

1

SN1 · panel directory

read from the single-line diagram / panel schedule

takeoff: TYPED PANEL DIRECTORY