BIDRecorded by kelchlin on Sep 29, 2026 — passTI

Loading…

Proposal

in RRE’s format · edit it on the page, then print or save as PDF

OutcomeNot recorded. Once you hear back, record it here: it is what the win rate on Home is made of.

Won Lost No decision / cancelled

4 fields in pink need your answer: nothing on the job says, so we did not guess. Press Edit proposal to fill them in.

DATE: 10/07/2026

ELECTRICAL BID PROPOSAL # [submission number — not answered]

intermissinni-2

115 Galleria Blvd. Roseville CA 95678

PROJECT / BID DETAILS [DIVISON 26 00 00 ]
Bid Submission #	[Bid Submission # — not answered]
Drawing Reference & Specs	Copy of 2024.11.28_INT_US_CA_Roseville_Galleria at Roseville_LL PERMIT BID SET_FULL.pdf
Addendum Acknowledged	N/A
Bid RFI	N/A
Labor Requirement	Private / Non-PW
Visited Site / Job Walk	[Visited Site / Job Walk — not answered]
Projected Start Date	TBD
Projected Completion	TBD
Project Performance Bond	[Project Performance Bond — not answered]
Work Schedule	Normal Working Hours
Type of Construction	Tenant Improvement
Project Area	[Project Area — not answered]
Bid Valid through	12/06/2026 (60 Days)
Prepared By: Name:kelchlin (Estimator) Email:[email — not answered] Phone:[phone — not answered]

PROJECT & PAYMENT TERMS

Monthly Progress Payment
Change Orders to be billed as soon as the works are completed on-site, as a separate invoice
T&M tags are to be billed as change orders.
5% Retentions
RRE will require a copy of the Prime Contract between the General Contractor & the Owner
RRE will require a Copy of the Pre-Lien Information
RRE will require a Project Schedule before mobilizations
GC agrees to participate in bi-weekly calls with RRE in regards to project progress/issue (20-minute call virtual) arranged by RRE
NO Change order works to be performed without proper paperwork documentation.

Page 1

PROPOSAL / PRICING

From	RRE Inc Electrical Contractor
Date	10/07/2026
To	intermissinni-2 115 Galleria Blvd. Roseville CA 95678

COST#	DESCRIPTION	COST FOR DAYWORKS
BASE BID	Electrical work specifically included per Scope of Work, plans, specifications, qualifications and exclusions. This work will be done during regular hours.	$30,546.06
COST	BASE BID (Alternatives Not Included)	$30,546.06

BID QUALIFICATION / LEVELLING

GC to provide a storage unit for temporary storage materials/large tools for the job site.
GC is responsible for the theft of material/large tools associated with the work of the EC
GC is responsible for locking the temporary storage unit.
GC to provide waste removal dumpster(s) and debris removal.
GC to remove all excess trenching spoils at GC’s cost.
Excludes any off-site street light or modification works
Includes use of MC Cables in T-bar areas / Hard lid Areas / Gyp Board and use of EMT for homeruns/power.

Page 2

BASE BID

INCLUSIONS

Furnish and install light fixtures per plan.
Furnish and install emergency lights.
Furnish and install lighting controls (sensors, switches, dimmers).
Furnish and install time clock.
Furnish and install receptacles per plan.
Furnish and install junction boxes per plan.
Furnish and install disconnect switches.
Furnish and install power to building signage.
Furnish and install conduit supports and hangers.
Furnish and install panelboards.
Furnish and install conduit with pull string for tele / data drops (cabling by others).
Furnish and install raceways and back boxes for cameras.

EXCLUSIONS

Excludes painting of conduits. (By Others)
Excludes sawcutting, concrete/asphalt removal, core drilling, debris disposal, and patchback. (By Others)
Excludes cutting of ceiling tiles for light fixtures. (By Others)
Excludes any electrical demo works. (By Others)
Excludes any Fire Alarm Works needed to verify on site if pricing is needed. Excludes any conduits, wiring, devices, programming, testing and related devices. (By Others)
Excludes short-circuit, coordination and arc-flash studies; only standard code-required equipment warning labels are included unless a study is specifically requested. (By Others)
Excludes any Low Voltage works (Phone/Data). Excludes any wiring, devices, programming, testing and related devices. (By Others)

Page 3

ALTERNATES

Alternates are excluded from the Base Bid unless specifically accepted in writing. Acceptance of any Alternate is limited solely to the scope of work, material supply, or combination thereof expressly identified within that Alternate.

No alternates on this proposal.

8 rows in pink need your review: read off the job where it says, otherwise left for you. Hover a row to see why, then press Edit proposal to confirm or change it.

RESPONSIBILITY MATRIX
EQUIPMENT/SCOPE	PROVIDER	REMARKS
Lighting Fixtures	?
Lighting Controls	By Others	Install by RRE
Exit / Emergency Lighting	?
Main Switchboard / Switchgear	By RRE
Panelboards	By RRE
Transformers	By RRE
Primary Utility	By Others
Secondary Utility	By Others
Mechanical / Plumbing Power	?
Rooftop Equipment Power	By RRE
Signage Power	By RRE
Fire Alarm	N/A
Low Voltage / Data	By RRE
Security / Access / Controls	N/A
Underground Raceway / Feeders	N/A

Page 4

RESPONSIBILITY MATRIX
EQUIPMENT/SCOPE	PROVIDER	REMARKS
Site / Pole Lighting	N/A
EV Charger Infrastructure	N/A
Trenching / Backfill	?
Concrete / Core Drill / Patchback	?
Electrical Demo / Safe-Off	By RRE
Temporary Power / Lighting	N/A
Testing / Commissioning	By RRE
Permits / Closeout	By RRE
Site / Parking Lot Lighting	N/A
Pole Bases	N/A
Underground Raceway	N/A
Site Lighting Branch Circuits	N/A
Transformer Pad	By Others
Pull Boxes / Handholes	N/A
Site Signage Power	N/A
Trenching / Excavation	?
Backfill Material	N/A
Trench Compaction	?
Compaction Testing	N/A
Concrete / Asphalt Cutting	N/A
Concrete / Asphalt Patchback	N/A

Page 5

RESPONSIBILITY MATRIX
EQUIPMENT/SCOPE	PROVIDER	REMARKS
Excess Soil / Off-Haul	?
Traffic Control	By Others
Joint Trench	N/A
Note: Project-specific Base Bid Inclusions, Exclusions, and accepted Alternates shall govern in the event of a conflict.

Page 6

TERMS & CONDITIONS

1.RRE is not to be held responsible for any manufacturer’s delayed shipping items.

2.RRE will not perform any change order works without a signed change order from the General Contractor.

3.Signed change order from the Authorized Project Manager / President

4.Time and material work to be performed upon agreed rates and billed as change orders.

Submittal Process

5.By approving the project submittals (light fixtures / light controls/ Panels / Switchgear etc), the General Contractor is agreeing that the approved types of equipment meet the design intent as per the plan & spec.

Change Order Process

6.This change order does not change the terms and conditions of the underlying contract except as otherwise outlined in the change order. Upon receipt of this proposal, please provide written acceptance of this Request.

7.Please advise RRE Inc Electrical Contractor should you have any questions or require clarification for the Change Order Request.

8.By approving this change order RRE Inc Electrical Contractors will not be held responsible if this change order does not meet the electrical design intent. Lead times may be subject to change at any point as dictated by the manufacturer. General Contractors / Owner / Tenant / Customer / Client agrees to hold RREInc Electrical Contractors harmless from all losses incurred due to product delays. Including but not limited to reasonable attorneys’ fees and other litigation costs and expenses General Contractors / Owner / Tenant / Customer / Client agrees to waive all claims against RREInc Electrical Contractors for any injuries, damages, losses, or claims, whether known or unknown which may arise during or resulting from participation in this agreement. Hereunto this proposed change order will take 72 Hours to commence. Please sign and return to our office as soon as possible. By signing this document, we agree with the terms & conditions as stated above.

Hidden Conditions

9.There will be hidden conditions that the Architect, Engineering Professionals, General Contractor, and Sub Contractors do not know until they are uncovered. Solution and pricing to hidden conditions uncovered will be determined at that point and time.

10.Underground Clause

All underground works shall be performed under the following circumstances:

Good weather conditions are defined as no precipitation or extreme weather events that could hinder the progress of the work.
Absence of rainfall during the scheduled work period.
The site must be leveled and staked out per the approved plans and specifications.
The absence of mud or other adverse site conditions may impede the underground work.
The pricing for this contract is based on the assumption of good/dry weather conditions. If RREInc Electrical Contractors are requested to perform the underground work under bad or unworkable weather conditions, there will be a cost impact. RREInc provides a detailed breakdown of the additional costs incurred due to such conditions, including but not limited to labor, equipment, and material expenses, which shall be subject to approval by the client or project manager before implementation.
Standard Exclusion for Underground Works: Unforeseen Site Conditions: Exclusions related to unforeseen site conditions, such as encountering rock formations, unanticipated groundwater, or contaminated soil, may require additional work and cost. Utilities and Services: Exclusions for the relocation, protection, or adjustment of existing utilities and services (e.g., water lines, gas lines, electrical conduits) unless explicitly stated otherwise in the scope of work. Permitting and Approvals: Exclusions for obtaining necessary permits, licenses, or approvals required for the underground works, including any associated fees or expenses. Design and Engineering: Exclusion for the design and engineering of underground structures or systems, unless explicitly included in the scope of work. Specialized Testing and Inspections: Exclusions for specialized testing and inspections beyond standard requirements, such as soil testing, geotechnical surveys, or third-party quality assurance/quality control services. Environmental Compliance: Exclusions related to compliance with environmental regulations and remediation of any environmental contamination encountered during underground works. Access and Site Preparation: Exclusions for access roads, temporary site facilities, and site preparation work not directly related to underground construction activities. Traffic Control and Safety Measures: Exclusions for traffic control measures, safety barriers, signage, and other measures required to ensure public safety during construction, unless explicitly included in the scope of work. Cleanup and Restoration: Exclusions for site cleanup, restoration of disturbed areas, and landscaping works following completion of the underground construction, unless explicitly included in the scope of work. Force Majeure Events: Exclusions for delays or damages caused by force majeure events such as natural disasters, acts of terrorism, or civil unrest, which are beyond the control of the contractor.
Excludes any cement slurry cap over conduits. (Unless stated in the scope of works)
Excludes any compaction testing works or reports.
Excludes Joint Trench
Excludes undermining any existing Boxes or T-Pads
Excludes any Vertical Shoring Works
Excludes any cart away of excess soil/dirt (Unless stated in the scope of works), this General Contractors responsibility
Excludes any Trench plates

Page 7

SUPPLY CHAIN, SUBMITTALS, AND LEAD TIME DISCLAIMER

Manufacturer and Supplier Delays

RRE Inc. Electrical Contractors shall not be held liable for any delays in the delivery of electrical gear, equipment, or materials caused by manufacturers, suppliers, shipping carriers, or other third parties beyond our control. This includes, but is not limited to, production backlogs, material shortages, shipping or freight disruptions, or other supply chain issues. In such cases, all project schedules, milestones, and completion deadlines shall be extended on a day-for-day basis equal to the length of the delay. No liquidated damages, penalties, or back charges shall be applied to RRE Inc. Electrical Contractors as a result of such delays. Furthermore, RRE Inc. reserves the right to submit for approval equivalent or substitute materials or to resequence work in a commercially reasonable manner to minimize the impact of such delays.

Submittal Approval and Design Intent

By approving this submittal, the Owner, Engineer, and/or General Contractor acknowledge that RRE Inc. Electrical Contractors is not responsible for verifying whether the submitted equipment or materials fully align with the electrical design intent. If the approved submittals do not conform to the original design concept or performance criteria, RRE Inc. shall be held harmless from any resulting issues, defects, or performance deficiencies in the electrical system.

Estimated Lead Time (Estimated Ship Date – ESD Disclaimer)

All lead times provided are Estimated Ship Dates (ESDs) and are based on information available at the time of issuance. These dates are subject to change without notice due to factors beyond the control of RRE Inc. Electrical Contractors, including but not limited to supplier or manufacturer production schedules, raw material availability, and shipping logistics. RRE Inc. makes no guarantees regarding actual ship or delivery dates and shall not be held liable for any impacts resulting from changes to the ESD.

Page 8

ACCEPTANCE & PAYMENT TERMS

Payments shall be made each thirty days as the work progresses. The entire amount of the contract shall be paid within thirty days after completion.

Service and Finance Charges are applicable on past accounts at the rate of 1 ½ percent per month on amounts thirty (30) days past due, which is equal to an annual percentage rate of 18 percent. Such charges are shown as “service charges”. There is no service charge if accounts are paid within thirty days of the end of the month in which purchases are made.

Any alteration or deviation from the above specifications involving the extra cost of material and/or labor will only be executed upon written orders for the same and will become an extra charge over the sum mentioned in this contract. All agreements must be made in writing.

The contractor agrees to carry Workman’s Compensation and Public Liability Insurance and also to pay all Sales Taxes, Old Age Benefits, and Unemployment Compensation Taxes upon the material and labor furnished under this contract, as required by the United States Government and the State in which this work is performed.

Respectfully submitted,

RRE INC. ELECTRICAL CONTRACTORS

PROJECT MANAGER

Note: This proposal may be withdrawn by us if not accepted within 60 days of the proposal date.

Acceptance

You are hereby authorized to furnish all materials and labor required to complete the work mentioned in the above proposal, for which the undersigned agrees to pay the amount mentioned in the said proposal, and according to the terms thereof. I also agree to pay all reasonable costs, charges, and attorney’s fees that may accrue hereon after any default in payments.

Proposal Accepted:

(Signature)

Printed Name of Signer:

Title:

Date:

Page 9

Basis of this price (internal — does not print)

Base bid$30,546.06PROVISIONALfrom 102 accepted lines

intermissinni-2

115 Galleria Blvd. Roseville CA 95678 · Bid 2026-09-29

Drawings this price is based on

Electrical · 14 sheets

E1.0	ELECTRICAL LEGENDS & SCHEDULES
E1.0	ELECTRICAL LEGENDS & SCHEDULES
E2.0	LIGHTING PLAN
E2.0	LIGHTING PLAN
E3.0	POWER PLAN
E3.0	POWER PLAN
E4.0	RISER DIAGRAM
E4.0	RISER DIAGRAM / SWITCHBANK DETAIL / LIGHTING CONTROL DIAGRAM
E4.1	PANEL SCHEDULES
E4.1	PANEL SCHEDULES
E5.0	ELECTRICAL SPECIFICATIONS
E5.0	ELECTRICAL SPECIFICATIONS
E6.0	ELECTRICAL ENERGY FORMS
E6.0	ELECTRICAL ENERGY FORMS

Architectural · 17 sheets

A001	SCHEDULES & DETAILS
A003	EGRESS PLAN
A101	CONSTRUCTION FLOOR PLAN
A102	CONSTRUCTION RCP
A102	CONSTRUCTION RCP
A105	FIXTURE PLAN
A201	CROSS SECTION
A202	CROSS SECTION
A204	VESTIBULE AND BOH ELEVATION
A211	CONSTRUCTION DETAILS
A213	CONSTRUCTION DETAILS
A301	STOREFRONT ELEVATION
A302

0 ft — #1 THWN CU WIRE - FEEDER XFMR TO PANEL L, #1 THWN copper, 3 phase + neutral, transformer secondary to Panel L. [E4.0 · modelled_riser] · pulling
0 ft — #10 THWN CU GROUND - FEEDER PANEL H TO XFMR, #10 THWN copper equipment ground, Panel H to transformer. [E4.0 · modelled_riser] · pulling
15 ea — #12 GA SEISMIC SAFETY WIRE, RECESSED FIXTURE TO STRUCTURE, 3 TURNS IN 1-1/2" EACH END, W/ 3/8" EXPANSION ANCHOR OR TIE-OFF AT STRUCTURE (1 per fixture < 10 lb, gyp ceiling), Independent #12 safety wire per recessed fixture in the suspended gyp ceiling: type A SLDRT recessed trimless downlight (9) + type EM Isolite LMIGN recessed emergency light (6). Fixtures themselves counted on E2.0. [A401 · detail_times_plan_count] · rough in overhead
12 ea — #12 GA SUPPLEMENTAL HANGER WIRE AT EACH CORNER OF 2x2 LAY-IN FIXTURE, ACT GRID TO STRUCTURE, 3 TIGHT TURNS IN 3" (fixture <= 20 lb), Supplemental 12 ga hanger wires at each corner of the BOH 2x2 lay-in LED panels (type B 2 + type BE 1) in the AC-1 ACT ceiling, plus attachment of fixture to grid. Fixtures counted on E2.0. [A401 · detail_times_plan_count] · trim
2,374.6 ft — #12 THHN CU BRANCH WIRE, Branch conductors for the modelled E3.0 circuits [E3.0 · raceway_model] · pulling
157.4 ft — #12 THHN CU, EDH-1 (3)#12 + #12 G, 4 conductors x 35 ft x 1.05 + 2.6 ft x 4 [E3.0 · plan_measure] · pulling
0 ft — #6 THWN CU GROUND - FEEDER XFMR TO PANEL L, #6 THWN copper equipment ground, transformer to Panel L. [E4.0 · modelled_riser] · pulling
0 ft — #6 THWN CU WIRE - FEEDER PANEL H TO XFMR, #6 THWN copper, 3 phase conductors, Panel H to transformer primary. [E4.0 · modelled_riser] · pulling
10 ft — 1 1/2" EMT CONDUIT (XFMR SECONDARY TO PANEL L), E4.0 keyed note 8 [E4.0 · schedule_read] · rough in wall
44.6 ft — 1-1/2" CONDUIT IN SLAB TRENCH, (7) RUNS, BOH WALL TO CASH DESK STUB-UP (horizontal in-slab run only), Trench line drawn and dimensioned 6'-4 3/8" on A101 from the BOH/sales partition to the 'CABLING FROM FLOOR FOR CASHDESK' dot; E3.0 keyed note 11 sets the conduit count at (7) 1-1/2". 7 x 6.37 ft. Vertical rises at the wall and the cash-desk stub-up are not included (stub-up already counted E3.0 L-0023). [A101 · plan_measure] · rough in slab
0 ft — 1-1/2" EMT CONDUIT - FEEDER 30 KVA XFMR TO PANEL L, 1-1/2" EMT, transformer secondary to Panel L 100A MCB, keyed note 8, with fittings and liquid-tight flex at the transformer. [E4.0 · modelled_riser] · rough in wall
402 ft — 1-5/8" STRUT CHANNEL, TRAPEZE HANGER CROSSMEMBERS ON 3/8" ALL-THREAD PAIRS FROM STRUCTURE (spec raceway 1.9), One trapeze per 10 ft of suspended 3/4" EMT: ~2,013 ft overhead branch EMT on E2.0 (868.6) + E3.0 (1,109.1 + 35.0 EDH-1) / 10 ft = 201 trapezes x 2 ft strut = 402 ft, each on a pair of 3/8" all-thread rods with conduit clamps; ceiling support wire not accepted [E5.0 · spec_clause] · rough in overhead
13 ft — 1/2" EMT STUB TO ABOVE CEILING W/ PULL STRING, THERMOSTAT/SENSOR (kn 17), Ceiling 12.17 ft (sales) / 9.84 ft (corridor): corridor 9.84-4.0=5.8 ft, sales 12.17-5.0=7.2 ft [E3.0 · keyed_note_calc] · rough in wall
1 ea — 2-GANG DEVICE BOX W/ PLASTER RING +42" AFF (SWITCHBANK d/e), 2-gang switch box with ring and 2-gang plate, switchbank d/e at +42" AFF. [E4.0 · detail_count] · rough in wall
20 ft — 2" EMT CONDUIT (NEW, LL STUB-IN TO PANEL H), Keyed note 5 new 2" conduit extended from landlord stub-in; remainder in EXISTING 2" conduit (note 4) [E4.0 · policy_allowance] · rough in overhead
1 ea — 3-GANG DEVICE BOX W/ PLASTER RING +48" AFF (SWITCHBANK a/b/c), 3-gang switch box with ring and 3-gang plate, sales area switchbank a/b/c at +48" AFF. [E4.0 · detail_count] · rough in wall
1,109.1 ft — 3/4" EMT BRANCH CONDUIT (receptacle/equipment circuits), Modelled per circuit from Panel L (BOH) to tagged devices on E3.0: 17 circuits placed; model default 1/2" raised to 3/4" minimum per E5.0 raceway 1.2 [E3.0 · raceway_model] · rough in overhead
0 ft — 3/4" EMT CONDUIT - FEEDER PANEL H TO 30 KVA XFMR, 3/4" EMT, Panel H 3P 50A (H-1,3,5) to transformer primary, keyed note 6, with fittings and 6 ft liquid-tight flex at the transformer. [E4.0 · modelled_riser] · rough in wall
10 ft — 3/4" EMT CONDUIT (PANEL H TO XFMR PRIMARY), E4.0 keyed note 6 [E4.0 · schedule_read] · rough in wall
142.2 ft — 3/4" EMT LV STUB W/ PULL STRING, AV/DATA POSITIONS, Per av_stub_rule: ceiling positions (WAP 1, CCTV 3, speaker 5) at 12 ft each = 108 ft; video wall data 2 x (12.17-7.08)=10.2 ft; storefront data 2 x 12 ft (height not given) = 24 ft [E3.0 · av_stub_rule] · rough in overhead
35 ft — 3/4" EMT, EDH-1 BRANCH L-37/39/41 (kn 13), Panel L to EDH-1 fused disconnect: 19.9 ft plan Manhattan + 10 ft rise + 5 ft stub [E3.0 · plan_measure] · rough in overhead
6 ea — 4" SQ CEILING J-BOX AT TRACK FEED W/ BLANK COVER, Ceiling J-box and live-end feed connection, one per track run [E2.0 · plan_count] · rough in overhead
3 ea — CCTV CAMERA ROUGH-IN POSITION (kn 5), CCTV camera positions; data cable run and terminated at IT rack in BOH [E3.0 · symbol_count] · rough in overhead
1 ea — CURRENT LIMITING PANEL FOR TRACK LIGHTING, 3 LIMITERS (4A L-5, 6A L-9, 2A L-3), E2.0 keyed note 4 + Current Limiting Panel schedule; T-24 current limiter method (E6.0 Table G) [E2.0 · schedule_read] · rough in wall
0 ea — CURRENT LIMITING PANEL, 3 LIMITERS (4A L-5, 6A L-9, 2A L-3), Track current-limiting panel per E2.0 keyed note 4 and schedule, at Panel L [E2.0 · note_count] · rough in wall
4 ea — DATA OUTLET POSITION, WALL (video wall +85" AFF, storefront), Data outlet triangles not covered by GC notes: 2 at video wall (L-17), 2 at storefront right [E3.0 · symbol_count] · rough in wall
4 ea — DIMMER SWITCH W/ PILOT LIGHT 120V (LIGHTING ZONES a, b, c, d), Wall dimmer/slide switch with pilot light indicating light status, 120V, white decorator: 'a' sales L-5, 'b' sales L-7, 'c' fitting room L-7, 'd' sales wall display L-9. All fixtures dimmable per CEC. [E4.0 · detail_count] · trim
6 ea — DOUBLE DUPLEX (QUAD) RECEPTACLE 20A, Paired duplex receptacles: cash desk L-6, L-8, L-10, L-12 (POS, L-6/8/10/12 marked HT) and IT rack L-18, L-20 [E3.0 · symbol_count] · trim
1 ea — DRY TYPE TRANSFORMER 30 KVA 480V DELTA - 120/208V WYE 3PH, New 30 kVA step-down transformer feeding Panel L, BOH [E4.0 · schedule_read] · rough in wall
12 ea — DUPLEX RECEPTACLE 20A 125V, WALL, Duplex receptacles: L-2 x2 (fitting room/sales wall), L-24 x2 (corridor/BOH), L-17 video wall +85" AFF x1 (kn 3, via TC), L-15 storefront +133" AFF x4 (kn 3, via TC), L-4 x3 (BOH/sales rear wall) [E3.0 · symbol_count] · trim
2 ea — DUPLEX RECEPTACLE 20A, INSIDE PLATFORM (kn 4), Platform/footboard receptacles on L-13 via time clock (kn 3, 4); GC supplies cable flap [E3.0 · symbol_count] · trim
2 ea — DUPLEX RECEPTACLE 20A, SHOW WINDOW (kn 2), Show-window receptacles on L-21 via time clock per CEC (kn 2) [E3.0 · symbol_count] · trim
1 ea — EDH-1 DUCT HEATER HARDWIRE CONNECTION (J-box + liquid-tight whip), Hard-wired connection of EDH-1 3P 15A 3027 W [E3.0 · symbol_count] · trim
1 ls — ELECTRICAL CLOSEOUT - operational check of all systems with trim, all light fixtures lamped and lensed, maintenance data / O&M and warranty manuals, Punch-list and turnover requirement for the electrical systems: operating condition complete with trim, all fixtures operable, maintenance data submitted. [AS01 · spec_note] · testing
868.6 ft — EMT CONDUIT 3/4" W/ FITTINGS, Lighting branch conduit, panel L to fixtures and track feeds; 3/4" min per E5.0 raceway 1.2 (model sized 1/2") [E2.0 · raceway_model] · rough in overhead
392 ea — EMT STRAPS BEYOND THE CATALOGUE SPACING, The 1-hole straps RRE adds to branch EMT: the EMT item carries one per 8 ft; RRE straps every 3-4 ft. [E3.0 · suggestion:emt-straps] · rough in overhead
8 ea — ENGRAVED PHENOLIC NAMEPLATE, BLACK/WHITE (spec nameplates 1.1, 3.10), Nameplates on Panel H, Panel L, 30 kVA XFMR, EDH-1 fused disconnect, VAV-1 motor-rated switch, sign disconnect, TC1 time clock, current-limiting panel [E5.0 · spec_clause] · trim
0 ea — EQUIPMENT CONNECTION - EDH-1 Indeeco QUZ electric duct heater, 3 kW, 208V 3-phase, 8.4 A, MOCP 15 A, above ceiling, Power connection to EDH-1 per the Electric Duct Heater Schedule (3 kW input, 208V/3PH, 8.40 A, MOCP 15, 260 CFM, notes 1-2 airflow interlock). [M1.0 · schedule_read] · trim
2 ea — EQUIPMENT CONNECTION 6 FT 3/4" LIQUID-TIGHT FLEX WHIP (EDH-1, VAV-1), Connection from disconnect to unit; E5.0 raceway 1.5 liquid-tight at motors/equipment [E3.0 · policy] · trim
200 ft — FEEDER GROUND WIRE #8 THWN CU (SERVICE FEEDER), (1)#8 GND, E4.0 keyed notes 4/5, 200 ft allowance [E4.0 · policy_allowance] · pulling
40 ft — FEEDER WIRE #1 THWN CU (30 KVA XFMR SECONDARY TO PANEL L), (4)#1 THWN, (1)#6 GND, 1 1/2" C. - E4.0 keyed note 8; 4 x 10 ft [E4.0 · schedule_read] · pulling
800 ft — FEEDER WIRE #1 THWN CU (SERVICE: LL SWBD 100A CB TO PANEL H), (4)#1 THWN, E4.0 keyed notes 4 and 5; 4 conductors x 200 ft allowance [E4.0 · policy_allowance] · pulling
30 ft — FEEDER WIRE #6 THWN CU (PANEL H TO 30 KVA XFMR PRIMARY), (3)#6 THWN, (1)#10 GND, 3/4" C. - E4.0 keyed note 6; 3 x 10 ft [E4.0 · schedule_read+plan_estimate] · pulling
1 ea — FLOOR STUB-UP FROM FLOOR TRENCH TO CASH DESK (kn 8), Stub-up location for cabling from floor trench to cash desk [E3.0 · symbol_count] · rough in slab
0 ea — FUSED DISCONNECT 30A 3P 240V NEMA 1, 15A FUSES, EDH-1 (kn 13), 30/3/15A fused disconnect for EDH-1 duct heater, L-37/39/41 [E3.0 · symbol_count] · rough in overhead
1 ea — FUSED DISCONNECT SWITCH 30A 3-POLE 240V NEMA 1 WITH (3) 15A FUSES (EDH-1), EDH-1 electric duct heater, L-37,39,41; E3.0 keyed note 13 '30/3/15A FUSED DISCONNECT' [E3.0 · schedule_read] · trim
1 ea — GFCI DUPLEX RECEPTACLE 20A (kn 15, HVAC), GFCI duplex receptacle for HVAC equipment within 25 ft, above ceiling at VAV-1/EDH-1, L-23 [E3.0 · symbol_count] · trim
10 ft — GROUND WIRE #10 THWN CU (PANEL H TO XFMR), (1)#10 GND per E4.0 keyed note 6 [E4.0 · schedule_read] · pulling
10 ft — GROUND WIRE #6 THWN CU (XFMR TO PANEL L), (1)#6 GND per E4.0 keyed note 8 [E4.0 · schedule_read] · pulling
1 ea — J-BOX 4-11/16" SQ W/ CONNECTION - TIME CLOCK TC1 (HARD-WIRED), Hard-wired connection to time clock TC1: 4-11/16" square J-box / wireway nipple from Panel L, line, neutral and load terminations for the controlled circuits. [E4.0 · hardwired_equipment_jbox] · rough in wall
5 ea — JUNCTION BOX 4" SQ ABOVE CEILING, MUSIC/SPEAKER CABLE (kn 6), J-box above ceiling at each ceiling speaker position; cable run and terminated at amplifier [E3.0 · symbol_count] · rough in overhead
1 ea — JUNCTION BOX 4" SQ, CEILING, VAV-1 CONNECTION, J-box and hard-wired connection at VAV-1 (L-35), liquid-tight whip [E3.0 · symbol_count] · rough in overhead
2 ea — JUNCTION BOX 4" SQ, THERMOSTAT +48" / REMOTE SENSOR +60" AFF (kn 17), Thermostat box (corridor) and remote sensor box (sales), MC installs stat [E3.0 · symbol_count] · rough in wall
2 ea — JUNCTION BOX 4" SQ, WALL, MIRROR LED HARDWIRE +48" AFF (kn 10), Hardwire J-box for oval mirror LED lighting, ADA fitting room, L-7, switched with fitting room lights [E3.0 · symbol_count] · rough in wall
1 ea — JUNCTION BOX, STOREFRONT SIGN +145" AFF (kn 16), Sign J-box within 5 ft of sign, L-1 via time clock [E3.0 · symbol_count] · rough in wall
1 ea — KEY SWITCH, 2-HOUR OVERRIDE, 45" AFF, Key 2-hr override switch for lighting controls (kn 5), at storefront [E2.0 · plan_count] · trim
26.3 ft — LED STRIP LIGHT, WARM WHITE, CONCEALED AROUND OVAL MIRROR PERIMETER (OM detail), Warm LED light strips around each owner-furnished oval mirror (L.1'-11 5/8" x H.5'-10 7/8"), ADA fitting room, concealed in GC wooden panel structure, hidden hardwired connection to the E3.0 kn 10 J-box. 13.1 ft per mirror x 2 mirrors. [A213 · detail_measurement] · trim
56 ea — LIGHT FIXTURE AIMING / DIRECTIONAL ADJUSTMENT, TRACK SPOTLIGHT TYPE T (KR103) AND RECESSED TYPE A (SLDRT), AS DIRECTED BY OWNER PM, Labour allowance for aiming adjustable heads per A102 RCP general note 2 (EC scope). Fixtures themselves are counted on E2.0. [A102 · general_note] · trim
1 ea — LIGHT FIXTURE LED VAPORTIGHT MAINTENANCE (kn 14, unscheduled), LED vaportight fixture above ceiling at HVAC access for maintenance [E3.0 · keyed_note] · trim
6 ea — LIGHT FIXTURE SEISMIC SUPPORT WIRE, #12 GALV. STEEL, TIED TO STRUCTURE, DIAGONAL OPPOSED CORNERS, 2x2 LAY-IN FIXTURE IN T-BAR (ACT) CEILING, Two #12 galv. wires per recessed lay-in fixture at diagonally opposed corners (ST1 detail 12 note 4), BOH ACT ceiling at 12'-2": types B (2) and BE (1) = 3 fixtures x 2 wires. Approx. 3 ft to deck each (field). [ST1 · detail_count_times_places] · rough in overhead
9 ea — LIGHT FIXTURE TYPE A, Quattrobi SLDRT-8030 17W recessed trimless downlight, dimmable, OWNER furnished - install/connect only [E2.0 · plan_tag_count] · trim
2 ea — LIGHT FIXTURE TYPE B, Lithonia CPX 2X2 3200LM 40K 31W recessed 2x2 LED panel (BOH), CFCI [E2.0 · plan_tag_count] · trim
1 ea — LIGHT FIXTURE TYPE BE, Lithonia CPX 2X2 31W recessed 2x2 LED panel with E10WLCP 90-min EM battery (BOH), CFCI [E2.0 · plan_tag_count] · trim
6 ea — LIGHT FIXTURE TYPE EM, Isolite LMIGN-EM ceiling recessed emergency light 6W, CFCI, unswitched leg (kn 1 / gen e) [E2.0 · plan_tag_count] · trim
1 ea — LIGHT FIXTURE TYPE EX, Exitronix GVEX exit sign w/ 90-min battery (BOH), CFCI, unswitched leg [E2.0 · plan_tag_count] · trim
1 ea — LIGHT FIXTURE TYPE N, Exitronix 902E recessed wall exit sign 5W (sales), CFCI, unswitched leg (kn 1) [E2.0 · plan_tag_count] · trim
47 ea — LIGHT FIXTURE TYPE T, Quattrobi KR103 26W 15deg track spotlight head, 120V dimmable, OWNER furnished (A102) - install/connect only [E2.0 · plan_tag_count] · trim
85 ea — MC CONNECTORS, Snap-in MC connectors at the boxes and fixtures the MC cable lands in. [E2.0 · suggestion:mc-connectors] · rough in overhead
125 ft — MC LUMINARY CABLE 12/3 TO FIXTURES, MC 12/3 luminary cable where two circuits share the run (normal and emergency, or two zones). [E2.0 · suggestion:luminary-12-3] · rough in overhead
373 ft — MC LUMINARY CABLE 16-2 TO FIXTURES, MC luminary cable (power with the 0-10V dimming pair) run fixture to fixture from the lighting J-boxes. [E2.0 · suggestion:luminary-16-2] · rough in overhead
2 ea — MIRROR LED LIGHTING HARDWIRE CONNECTION, Final connection of oval mirror LED lighting at J-box (hard-wired equipment) [E3.0 · symbol_count] · trim
1 ea — MOTOR RATED SWITCH 1-POLE 20A 120V NEMA 1 (VAV-1 DISCONNECT), VAV-1, L-35; E3.0 keyed note 12 [E3.0 · schedule_read] · trim
0 ea — MOTOR RATED SWITCH 20A 1P, VAV-1 DISCONNECT (kn 12), Motor-rated toggle disconnect at VAV-1, L-35, (2)#12+#12G 3/4" [E3.0 · symbol_count] · trim
1 ea — OCCUPANCY SENSOR DIMMER SWITCH, WALL MOUNT 120V W/ PILOT (ZONE e, BOH), Wall-box occupancy sensor switch with dimming slide, 120V, BOH lights L-11, +42" AFF; on the neutral/unswitched side of TC1 (not time-clock controlled). A102: occupancy sensors required in all BOH areas. [E4.0 · detail_count] · trim
0 ea — OCCUPANCY SENSOR WALL SWITCH (BOH zone e), BOH zone e occupancy-sensor switch at switchbank, 42" AFF (A102 occ. sensors in all BOH) [E2.0 · plan_count] · trim
0 ea — OVERRIDE SWITCH 0-2 HR (TIMER) AT STOREFRONT, 1-GANG, FOR TIME CLOCK TC1, 0-2 hour override switch at the storefront wired to TC1 override input (E2.0 kn 5: key-operated 2-hr override switch at 45" AFF), with 1-gang box, ring and plate. [E4.0 · detail_count] · trim
2 ea — PANEL DIRECTORIES / CIRCUIT IDENTIFICATION, CEC 408.4 per E4.0 gen note g; Panels H and L [E4.0 · schedule_read] · testing
1 ea — PANELBOARD 100A MCB 120/208V 3PH 4W 42 CIRCUIT SURFACE NEMA 1 10KAIC (PANEL L), New Panel L, 42 circuit positions [E4.1 · schedule_read] · rough in wall
1 ea — PANELBOARD 100A MCB 277/480V 3PH 4W SURFACE NEMA 1 22KAIC (PANEL H), New Panel H, 28 circuit positions scheduled (1-28), 100A main breaker [E4.1 · schedule_read] · rough in wall
0 ea — PANELBOARD H 277/480V 3PH 4W 100A MCB 28 CKT SURFACE NEMA 1 22 KAIC, New Panel H, 480Y/277V 3-phase 4-wire, 100A main breaker, 28 circuit, surface mounted NEMA 1, 22 KAIC, in BOH; fed from existing landlord 100A CB (keyed notes 4/5). [E4.0 · riser_count] · rough in wall
0 ea — PANELBOARD L 120/208V 3PH 4W 100A MCB 42 CKT SURFACE NEMA 1 10 KAIC, New Panel L, 120/208V 3-phase 4-wire, 100A main breaker, 42 circuit, surface mounted NEMA 1, 10 KAIC, in BOH (riser shows (N)PANEL L 120/208V fed from the 30 kVA transformer). [E4.0 · riser_count] · rough in wall
1 ea — PLYWOOD BACKBOARD 3/4" x 4' x 8', FIRE-RETARDANT, SURFACE PANELS H / L / XFMR (spec 3.12), Backboard for surface-mounted Panel H, Panel L, time clock TC1 and current-limiting panel in BOH [E5.0 · spec_clause] · rough in wall
1 ea — RRE PER-JOB KIT, The allowance RRE carries on every job: 276 tan wire nuts, 92 insulated pigtails, 184 anti-short bushings, a 4x8 plywood backboard, 20 5/8" anchors with all-thread and washers, sealant, two screw-cover boxes, PVC fittings and channel cuts. [E4.0 · suggestion:house-kit] · rough in overhead
1 ea — RRE PER-JOB LOOSE PARTS, 276 tan wire nuts, 92 insulated pigtails, 184 anti-short bushings with their screws, a 4x8 plywood backboard and 1" PVC fittings. [E4.0 · suggestion:house-kit-loose] · rough in overhead
8 hr — SAFE-OFF EXISTING ELECTRICAL (TI), Make safe existing tenant circuits/fixtures before GC demolition (D102 shows existing ceiling fixtures, sockets, track to be removed) [D102 · policy] · safe off
0 ea — SIGN CONNECTION + DISCONNECT SWITCH 20A 1P (kn 16 'as required'), Sign disconnect and final connection at storefront sign [E3.0 · keyed_note] · trim
1 ea — SIGN DISCONNECT SWITCH 20A 1-POLE 120V (STOREFRONT SIGN, AS REQUIRED), L-1 storefront sign via time clock; E3.0 keyed note 16 'PROVIDE DISCONNECT AS REQUIRED' [E3.0 · schedule_read] · trim
1 ea — SINGLE POLE SWITCH 20A, LOCAL AT ACCESS ENTRY (kn 14), Local control switch for maintenance vaportight fixture [E3.0 · keyed_note] · trim
0 ea — SWITCH, SINGLE POLE 20A W/ PILOT LIGHT, Lighting switchbank SB (kn 2): zones a, b (sales), c (fitting) at 48" AFF, d (wall display) at 42" [E2.0 · plan_count] · trim
1 ea — SWITCH, SINGLE POLE LINE-VOLTAGE OVERRIDE, Line voltage override switch at fixture adjacent to electrical equipment, CEC 110.26(D) (kn 6) [E2.0 · plan_count] · trim
9 ea — TENMAT FIRE-RATED COVER OVER RECESSED DOWNLIGHT, A Tenmat FF109-300 cover over each recessed downlight in a fire-rated ceiling. [E2.0 · suggestion:downlight-tenmat] · rough in overhead
1 lot — TESTING AFTER INSTALLATION + CURRENT READINGS AND PHASE BALANCE AT PANELS H/L (spec 5.1h, 2.9), Test all cables and circuit wiring after installation; take current readings at completion and rebalance phases (within 10%, E4.0 h) [E5.0 · spec_clause] · testing
1 ea — TIME CLOCK 24 HR / 7 DAY ASTRONOMICAL (INTERMATIC ET91215CR OR EQUAL) TC1, Controls L-1,3,5,7,9,13,15,17,21 (REM TC) + 3 spares [E4.0 · schedule_read] · trim
1 ea — TIME CLOCK SET-UP AND PROGRAMMING - TC1 Intermatic ET91215CR astronomical time clock, 0-2 hr storefront override, Set all time clocks per the owner's representative at turnover (AS01 Turnover Requirements 5); thermostats in the same note are the mechanical contractor's. [AS01 · spec_note] · testing
0 ea — TIME CLOCK TC1 - 24HR/7DAY ASTRONOMICAL, INTERMATIC ET91215CR OR EQUAL, Astronomical 7-day time switch TC1 (Intermatic ET91215CR or equal), surface mounted in BOH at the panels, controlling L-1 sign, L-3 storefront lights, L-13, L-15, L-17, L-21 receptacles and switch legs a-d (L-5, L-7, L-9); 3 spare outputs. [E4.0 · detail_count] · trim
0 ea — TRANSFORMER 30 KVA 480V DELTA - 208Y/120V 3PH DRY TYPE FLOOR MOUNTED, New 30 kVA dry-type transformer, 480V primary to 120/208V 3-phase 4-wire secondary, floor mounted in BOH beside Panels H and L, with pads/vibration isolators and connections. [E4.0 · riser_count] · rough in wall
2,207.3 ft — WIRE #12 THHN CU, Lighting branch conductors, THHN in EMT [E2.0 · raceway_model] · pulling
4 ea — WIRE TERMINATION 100A 4-WIRE (#1) FEEDER, Existing LL SWBD 100A CB, Panel H main, XFMR secondary, Panel L main [E4.0 · schedule_read] · trim
1 ea — WIRE TERMINATION 15A 3-POLE 3-WIRE (#12) EDH-1, L-37,39,41 EDH-1 [E4.1 · schedule_read] · trim
21 ea — WIRE TERMINATION 20A 1-POLE 2-WIRE (#12), Loaded 20A 1P circuits on Panel L: odd 1,3,5,7,9,11,13,15,17,21,23,35 (12) + even 2,4,6,8,10,12,18,20,24 (9) [E4.1 · schedule_read] · trim
2 ea — WIRE TERMINATION 50A 3-POLE 3-WIRE (#6) PANEL H TO XFMR, Both ends: H-1,3,5 breaker and transformer primary [E4.1 · schedule_read] · trim
1 ea — WIRELESS ACCESS POINT ROUGH-IN, CEILING (kn 7), WiFi router position; data cable to IT rack in BOH; 1-1/2" conduit with pull string to above ceiling (E1.0 legend) [E3.0 · symbol_count] · rough in overhead

M1.0	MECHANICAL LEGENDS, NOTES, AND SCHEDULES
M2.0	MECHANICAL FLOOR PLAN
M4.0	MECHANICAL SPECIFICATIONS

S301	SECTIONS & DETAILS
ST1	STRUCTURAL DETAILS

Proposal

ELECTRICAL BID PROPOSAL # [submission number — not answered]

PROJECT & PAYMENT TERMS

PROPOSAL / PRICING

TERMS & CONDITIONS

SUPPLY CHAIN, SUBMITTALS, AND LEAD TIME DISCLAIMER

ACCEPTANCE & PAYMENT TERMS

Acceptance

intermissinni-2

Drawings this price is based on

Not included in this price

Scope included (102 lines)

D102	DEMOLITION RCP
D102	DEMOLITION RCP